Echelon LumInsight Provisioning Tool ReadMe 
Release 1.00.017, December 2015

Copyright © 2015 Echelon Corporation
All Rights Reserved

 

1      Overview

LumInsight Provisioning Tool provisions an Echelon SmartServer segment controller for use with an outdoor lighting network managed with the LumInsight CMS.  It adds lighting control devices to the Echelon SmartServer segment controller prior to the system becoming managed by the LumInsight CMS.

This document describes the known problems and workarounds for the LumInsight Provisioning Tool.  For additional information and updates (including critical updates), see www.echelon.com/downloads.  For answers to frequently asked questions, see Echelon’s Knowledge Base at www.echelon.com/support/kb.  For the latest LumInsight news, see www.echelon.com.

2      Contents

1        Overview

2        Contents

3        Release Identification

4        System Requirements

3      Release Identification

This ReadMe document applies to the 1.00.017 release of LumInsight Provisioning Tool.  You can verify that you have this release by starting the Programs and Features control panel, and checking the Version number of the LumInsight Provisioning Tool entry.

4      System Requirements

Following are the system requirements for computers running the LumInsight Provisioning Tool.

·         MicrosoftÒ Windows 10 (64-bit and 32-bit), Windows 8.1 (64-bit and 32-bit), Windows 7 (64-bit and 32-bit), Windows Server 2012 (64-bit).

·         Microsoft .NET Framework 4.0.

·         500MHz processor or faster (2 GHz or faster processor recommended).

·         2 GB or more of free disk space. 

·         2 GB RAM minimum.

·         1,024 x 768 or higher resolution display.

·         Mouse or compatible pointing device.

 

An Echelon SmartServer segment controller is required for each lighting network to be provisioned with the LumInsight Provisioning Tool.  For a SmartServer segment controller to be provisioned with the LumInsight Provisioning Tool, it must have SmartServer 2.2 Service Pack 3 and the Lumewave Outdoor Lighting System (OLS) Framework installed.

To install SP3, go to http://www.echelon.com/software-downloads?ele=153-0593-01A.

To install OLS, go to http://echelon.com/products/luminsight and click RESOURCES to go to the resources area and then click DOWNLOADS to get the OLS download.