Echelon
LumInsight Enterprise CMS ReadMe
Release 1.10.008, April 18,
2016
Copyright © 2015-2016 Echelon
Corporation
All Rights Reserved
The latest version of this file can be located at http://downloads.echelon.com/support/downloads/software/luminsight/cms/1.10.008/ReadMe.htm.
LumInsight Enterprise CMS 1.1 is a configuration management system (CMS) for provisioning, monitoring, and controlling Echelon’s power line based connected outdoor lighting platform. The LumInsight Enterprise CMS enables commercial enterprises, campuses, municipalities, city utilities, and operators to reduce energy usage and maintenance cost and increase safety of outdoor lighting systems. The LumInsight Enterprise CMS complements Echelon’s LumInsight Desktop for RF (formerly LumeStar), allowing outdoor lighting system installers to deploy the best of breed wired and wireless outdoor lighting control system that is appropriate for the application.
The LumInsight CMS manages Echelon CPD 3000 Outdoor Lighting Controllers connected through an Echelon SmartServer segment controller, and works in conjunction with the LumInsight Provisioning Tool to prepare the lighting network for commissioning.
This document describes LumInsight Enterprise CMS 1.1. For additional information and updates (including critical updates), go to www.echelon.com/downloads. For answers to frequently asked questions, see Echelon’s Knowledge Base at www.echelon.com/support/kb. For the latest LumInsight news, go to www.echelon.com.
5 Installing LumInsight Enterprise CMS 1.10
6.1 Improvements in LumInsight Enterprise 1.10
6.2 Improvements in LumInsight Enterprise 1.01
7.1 Fixes in LumInsight Enterprise 1.10
7.2 Fixes in LumInsight Enterprise 1.01
8 Known Problems and Workarounds
This ReadMe document applies to the 1.10.008 release of LumInsight Enterprise. You can verify that you have this release by starting the Programs and Features control panel, and checking the Version number of LumInsight Enterprise CMS.
The following are the LumInsight Enterprise CMS releases in reverse chronological order.
|
Name |
Number |
Date |
|
LumInsight Enterprise CMS |
1.10 |
Apr 2016 |
|
LumInsight Enterprise CMS |
1.01 |
Feb 2016 |
|
LumInsight Enterprise CMS |
1.00 |
Dec 2015 |
Following are the system requirements for computers running LumInsight Enterprise CMS:
· MicrosoftŇ Windows Server 2012 (64-bit), Windows 10 (64-bit and 32-bit), Windows 8.1 (64-bit and 32-bit), and Windows 7 (64-bit and 32-bit).
· Microsoft Internet Information Services (IIS) (installed and enabled)
· 500 MHz processor or faster (2 GHz or faster processor recommended).
· 2 GB or more of free disk space.
· 2 GB RAM minimum.
· 1,024 x 768 or higher resolution display.
You can update any prior release of LumInsight Enterprise CMS to LumInsight Enterprise CMS 1.10 by installing the LumInsight Enterprise CMS download image. See section “3 Release Identification” above for a list of previous releases. For details on the installation of LumInsight Enterprise CMS 1.10, see the following document:
http://www.echelon.com/assets/bltb9108c2431940f45/LumInsight%20Installation%20Guide_078-1059-01A.pdf
Note that if you upgrade to 1.10 from 1.00, then you may observe that certain object names that were permitted in 1.00 are no longer permitted in 1.01. For example, special characters other than underscore and hyphen are not allowed. Also, names are now limited in length.
Note that if you upgrade to 1.10 from 1.00, you must not uninstall 1.00 first as doing so will result in a loss of your data.
To upgrade a functioning installation that is using HTTPS, you must first revert to HTTP. After the upgrade is complete, you can restore HTTPS.
The following table shows the notable improvements in this release:
|
Added an “on demand log sent” button to the FPM management UI |
|
|
Cabinet alarm email notifications now include a link to a pin location on a map |
|
|
During schedule creation, user can now copy a daily schedule to the rest of the week. |
|
|
Support was added for “direct” fixtures that are not controlled via CPD-3000s but instead controlled directly by a contactor driven by the SmartServer digital output relay. |
|
|
Segment controller replacement is now supported. |
|
|
Energy data can now be shown for an entire geozone, the data being the summation of all devices in the geozone. |
|
|
Segment controller data history now includes log delivery and reset history information. |
|
|
The zooming within geozones has been improved to be more intuitive and useful. |
|
|
In general, viewing statistics and properties for geozones is now hierarchical. The data is collected for the geozone and those below it in the hierarchy. |
The following table shows the notable improvements in this release:
|
Cabinet alarms that are on segment controllers within nested geozones now appear when looking at an upper level geozone. |
The following table shows the notable fixes in this release:
|
The root admin now has ability to set privileges on all users. |
The following table shows the notable fixes in this release:
|
The power factor value in the energy history graph could sometimes erroneously be zero. |
Echelon, LON, the Echelon logo and LonWorks are trademarks of Echelon Corporation that may be registered in the United States and other countries. For a complete list of registered trademarks see the Echelon website at www.echelon.com. All Rights Reserved.
Other trademarks belong to their respective holders.