You can use the Sensors tab to view the datapoint outputs of the Environment Sensor devices. You can also use the Sensors tab to view and modify the configuration datapoints for the Environment Sensor devices.
You can view the sensor values in the Sensor Table that is displayed by default. For the Occupancy Mode value, the value displayed will be Auto, Test, Force On, or Force Off. Force Occupied is reflected at the environment sensor as a green LED and Force Unoccupied is a red LED.
To view or modify the configuration of one or more Environment Sensor devices, click the Config button. This displays the Configuration Datapoint Value Table with the configuration datapoint values.
You can copy the configuration of any of the Environment Sensor devices to the Configuration Datapoint Value Table. To copy the configuration datapoint values from an Environment Sensor device, click the Copy Config button for the device.
You can copy the configuration specified by the Configuration Datapoint Value Table to any of the displayed sensor devices. To copy the configuration to a set of sensor devices, select the check boxes for the sensor devices to be updated, and then click the Submit button at the top of the Configuration Datapoint Value Table.