The LED tab of the dashboard gives you control of the colors of your LEDs.
You can select primary colors with the color bar. You select any color with the color wheel or color value boxes. You can vary hue saturation with the sliders.
You can set LEDs to a scene, where the color is determined by the scene configuration stored in each LED. To set a scene, select the scene in the Scene box.
To set the individual color of an LED, select the LED by clicking the check box next to, and then use the color choices described above. The color will change in the LED you selected.
To set the color of multiple LEDs, either select the check boxes for all the LEDs to be changed, or select the check boxes for Keypad devices that are connected to the LEDs. The LED Web page uses individual messages to control each LED. You can use connected Keypad to simultaneously change multiple LEDs.
You can perform your own color test, which cycles through a variety of hue factors, or select a test from the menu shown, and cycle through the different intensities of red shades, green shades, or blue shades. There is a box provided in the test area which lets you select the length of time before the test moves to the next test value.
You can both select and unselect LEDs to change colors using the select and unselect button. To repeat a color, use the Set Color Again button.